Warning: Permanently added '10.128.15.200' (ED25519) to the list of known hosts.
2024/04/16 17:01:56 ignoring optional flag "sandboxArg"="0"
2024/04/16 17:01:56 parsed 1 programs
2024/04/16 17:01:56 executed programs: 0
[   39.610776][ T5239] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[   39.620487][ T5249] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   39.621429][ T5250] Bluetooth: hci2: unexpected cc 0x0c03 length: 249 > 1
[   39.628997][ T5249] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[   39.636319][ T5250] Bluetooth: hci5: unexpected cc 0x0c03 length: 249 > 1
[   39.642694][ T5249] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[   39.650129][ T5250] Bluetooth: hci4: unexpected cc 0x0c03 length: 249 > 1
[   39.664062][ T5249] Bluetooth: hci6: unexpected cc 0x0c03 length: 249 > 1
[   39.664421][ T5250] Bluetooth: hci7: unexpected cc 0x0c03 length: 249 > 1
[   39.672029][ T5249] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   39.680006][ T5250] Bluetooth: hci2: unexpected cc 0x1003 length: 249 > 9
[   39.686392][ T5249] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[   39.700841][ T5249] Bluetooth: hci5: unexpected cc 0x1003 length: 249 > 9
[   39.700919][ T5250] Bluetooth: hci4: unexpected cc 0x1003 length: 249 > 9
[   39.708349][ T5249] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[   39.715486][ T5250] Bluetooth: hci6: unexpected cc 0x1003 length: 249 > 9
[   39.722228][ T5249] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   39.729457][ T5250] Bluetooth: hci7: unexpected cc 0x1003 length: 249 > 9
[   39.736009][ T5249] Bluetooth: hci4: unexpected cc 0x1001 length: 249 > 9
[   39.743086][ T5250] Bluetooth: hci2: unexpected cc 0x1001 length: 249 > 9
[   39.749889][ T5249] Bluetooth: hci5: unexpected cc 0x1001 length: 249 > 9
[   39.757530][ T5250] Bluetooth: hci6: unexpected cc 0x1001 length: 249 > 9
[   39.764200][ T5249] Bluetooth: hci7: unexpected cc 0x1001 length: 249 > 9
[   39.772595][ T5250] Bluetooth: hci5: unexpected cc 0x0c23 length: 249 > 4
[   39.777891][ T5249] Bluetooth: hci6: unexpected cc 0x0c23 length: 249 > 4
[   39.785771][ T5250] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   39.792236][ T5249] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[   39.799371][ T5250] Bluetooth: hci2: unexpected cc 0x0c23 length: 249 > 4
[   39.806209][ T5249] Bluetooth: hci5: unexpected cc 0x0c25 length: 249 > 3
[   39.813347][ T5250] Bluetooth: hci6: unexpected cc 0x0c25 length: 249 > 3
[   39.820592][ T5249] Bluetooth: hci7: unexpected cc 0x0c23 length: 249 > 4
[   39.827680][ T5250] Bluetooth: hci0: unexpected cc 0x0c25 length: 249 > 3
[   39.833941][ T5249] Bluetooth: hci5: unexpected cc 0x0c38 length: 249 > 2
[   39.840856][ T5250] Bluetooth: hci1: unexpected cc 0x0c25 length: 249 > 3
[   39.847803][ T5249] Bluetooth: hci6: unexpected cc 0x0c38 length: 249 > 2
[   39.854651][ T5250] Bluetooth: hci2: unexpected cc 0x0c25 length: 249 > 3
[   39.862166][ T5249] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[   39.868847][ T5250] Bluetooth: hci7: unexpected cc 0x0c25 length: 249 > 3
[   39.875806][ T5249] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   39.883606][ T5250] Bluetooth: hci2: unexpected cc 0x0c38 length: 249 > 2
[   39.890148][ T5249] Bluetooth: hci7: unexpected cc 0x0c38 length: 249 > 2
[   39.904858][ T5249] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
[   39.969109][ T5250] Bluetooth: hci4: unexpected cc 0x0c23 length: 249 > 4
[   39.981186][ T5250] Bluetooth: hci3: unexpected cc 0x0c23 length: 249 > 4
[   39.983440][ T5252] Bluetooth: hci4: unexpected cc 0x0c25 length: 249 > 3
[   39.988788][ T5250] Bluetooth: hci3: unexpected cc 0x0c25 length: 249 > 3
[   39.995418][ T5252] Bluetooth: hci4: unexpected cc 0x0c38 length: 249 > 2
[   40.003185][ T5250] Bluetooth: hci3: unexpected cc 0x0c38 length: 249 > 2
[   40.247283][ T5228] chnl_net:caif_netlink_parms(): no params data found
[   40.332728][ T5229] chnl_net:caif_netlink_parms(): no params data found
[   40.393794][ T5238] chnl_net:caif_netlink_parms(): no params data found
[   40.427771][ T5244] chnl_net:caif_netlink_parms(): no params data found
[   40.452902][ T5228] bridge0: port 1(bridge_slave_0) entered blocking state
[   40.470189][ T5228] bridge0: port 1(bridge_slave_0) entered disabled state
[   40.477903][ T5228] device bridge_slave_0 entered promiscuous mode
[   40.513710][ T5240] chnl_net:caif_netlink_parms(): no params data found
[   40.527212][ T5227] chnl_net:caif_netlink_parms(): no params data found
[   40.543188][ T5228] bridge0: port 2(bridge_slave_1) entered blocking state
[   40.550840][ T5228] bridge0: port 2(bridge_slave_1) entered disabled state
[   40.558438][ T5228] device bridge_slave_1 entered promiscuous mode
[   40.584421][ T5226] chnl_net:caif_netlink_parms(): no params data found
[   40.616243][ T5228] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   40.648727][ T5229] bridge0: port 1(bridge_slave_0) entered blocking state
[   40.657235][ T5229] bridge0: port 1(bridge_slave_0) entered disabled state
[   40.667457][ T5229] device bridge_slave_0 entered promiscuous mode
[   40.678118][ T5229] bridge0: port 2(bridge_slave_1) entered blocking state
[   40.685328][ T5229] bridge0: port 2(bridge_slave_1) entered disabled state
[   40.693281][ T5229] device bridge_slave_1 entered promiscuous mode
[   40.711190][ T5228] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   40.746360][ T5235] chnl_net:caif_netlink_parms(): no params data found
[   40.762302][ T5238] bridge0: port 1(bridge_slave_0) entered blocking state
[   40.769434][ T5238] bridge0: port 1(bridge_slave_0) entered disabled state
[   40.777876][ T5238] device bridge_slave_0 entered promiscuous mode
[   40.803396][ T5229] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   40.815282][ T5244] bridge0: port 1(bridge_slave_0) entered blocking state
[   40.822633][ T5244] bridge0: port 1(bridge_slave_0) entered disabled state
[   40.830493][ T5244] device bridge_slave_0 entered promiscuous mode
[   40.839945][ T5244] bridge0: port 2(bridge_slave_1) entered blocking state
[   40.847206][ T5244] bridge0: port 2(bridge_slave_1) entered disabled state
[   40.854854][ T5244] device bridge_slave_1 entered promiscuous mode
[   40.862294][ T5238] bridge0: port 2(bridge_slave_1) entered blocking state
[   40.869354][ T5238] bridge0: port 2(bridge_slave_1) entered disabled state
[   40.877063][ T5238] device bridge_slave_1 entered promiscuous mode
[   40.895527][ T5240] bridge0: port 1(bridge_slave_0) entered blocking state
[   40.902618][ T5240] bridge0: port 1(bridge_slave_0) entered disabled state
[   40.910193][ T5240] device bridge_slave_0 entered promiscuous mode
[   40.921401][ T5229] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   40.942907][ T5227] bridge0: port 1(bridge_slave_0) entered blocking state
[   40.949945][ T5227] bridge0: port 1(bridge_slave_0) entered disabled state
[   40.958519][ T5227] device bridge_slave_0 entered promiscuous mode
[   40.967723][ T5228] team0: Port device team_slave_0 added
[   40.974021][ T5240] bridge0: port 2(bridge_slave_1) entered blocking state
[   40.981127][ T5240] bridge0: port 2(bridge_slave_1) entered disabled state
[   40.988606][ T5240] device bridge_slave_1 entered promiscuous mode
[   41.019498][ T5227] bridge0: port 2(bridge_slave_1) entered blocking state
[   41.027013][ T5227] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.035251][ T5227] device bridge_slave_1 entered promiscuous mode
[   41.043248][ T5228] team0: Port device team_slave_1 added
[   41.075476][ T5238] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.085921][ T5244] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.117578][ T5226] bridge0: port 1(bridge_slave_0) entered blocking state
[   41.124698][ T5226] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.133043][ T5226] device bridge_slave_0 entered promiscuous mode
[   41.141576][ T5229] team0: Port device team_slave_0 added
[   41.148637][ T5238] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.161409][ T5244] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.176336][ T5228] batman_adv: batadv0: Adding interface: batadv_slave_0
[   41.183447][ T5228] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.210320][ T5228] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   41.222941][ T5240] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.238506][ T5240] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.256588][ T5226] bridge0: port 2(bridge_slave_1) entered blocking state
[   41.263745][ T5226] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.271941][ T5226] device bridge_slave_1 entered promiscuous mode
[   41.279772][ T5229] team0: Port device team_slave_1 added
[   41.295788][ T5227] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.305532][ T5228] batman_adv: batadv0: Adding interface: batadv_slave_1
[   41.312632][ T5228] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.338792][ T5228] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   41.384976][ T5227] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.397274][ T5235] bridge0: port 1(bridge_slave_0) entered blocking state
[   41.404497][ T5235] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.412556][ T5235] device bridge_slave_0 entered promiscuous mode
[   41.421259][ T5240] team0: Port device team_slave_0 added
[   41.434199][ T5238] team0: Port device team_slave_0 added
[   41.445033][ T5244] team0: Port device team_slave_0 added
[   41.468911][ T5235] bridge0: port 2(bridge_slave_1) entered blocking state
[   41.476437][ T5235] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.484773][ T5235] device bridge_slave_1 entered promiscuous mode
[   41.492176][ T5240] team0: Port device team_slave_1 added
[   41.499560][ T5226] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.509997][ T5238] team0: Port device team_slave_1 added
[   41.515912][ T5229] batman_adv: batadv0: Adding interface: batadv_slave_0
[   41.522966][ T5229] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.549070][ T5229] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   41.561623][ T5244] team0: Port device team_slave_1 added
[   41.568745][ T5227] team0: Port device team_slave_0 added
[   41.591038][ T5226] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.606404][ T5229] batman_adv: batadv0: Adding interface: batadv_slave_1
[   41.614104][ T5229] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.640391][ T5229] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   41.655867][ T5227] team0: Port device team_slave_1 added
[   41.664828][ T5228] device hsr_slave_0 entered promiscuous mode
[   41.673806][ T5228] device hsr_slave_1 entered promiscuous mode
[   41.716261][ T5235] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.725913][ T5240] batman_adv: batadv0: Adding interface: batadv_slave_0
[   41.733244][ T5240] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.759479][ T5240] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   41.775661][ T5244] batman_adv: batadv0: Adding interface: batadv_slave_0
[   41.782859][ T5244] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.809006][ T5244] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   41.821785][ T5238] batman_adv: batadv0: Adding interface: batadv_slave_0
[   41.828733][ T5238] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.855370][ T5238] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   41.867291][ T5227] batman_adv: batadv0: Adding interface: batadv_slave_0
[   41.874724][ T5227] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.900765][ T5227] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   41.913135][ T5227] batman_adv: batadv0: Adding interface: batadv_slave_1
[   41.920195][ T5227] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   41.947163][ T5250] Bluetooth: hci2: command 0x0409 tx timeout
[   41.947177][ T5237] Bluetooth: hci1: command 0x0409 tx timeout
[   41.953387][ T5250] Bluetooth: hci7: command 0x0409 tx timeout
[   41.953488][ T5250] Bluetooth: hci5: command 0x0409 tx timeout
[   41.953695][ T5227] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   41.983961][ T5235] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.996308][ T5240] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.003325][ T5240] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.010285][ T5247] Bluetooth: hci0: command 0x0409 tx timeout
[   42.029806][ T5237] Bluetooth: hci6: command 0x0409 tx timeout
[   42.042574][ T5240] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.054792][ T5226] team0: Port device team_slave_0 added
[   42.066026][ T5244] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.076576][ T5244] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.102749][ T5237] Bluetooth: hci4: command 0x0409 tx timeout
[   42.102913][ T5237] Bluetooth: hci3: command 0x0409 tx timeout
[   42.115563][ T5244] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.132453][ T5238] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.139409][ T5238] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.165700][ T5238] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.193065][ T5226] team0: Port device team_slave_1 added
[   42.252845][ T5229] device hsr_slave_0 entered promiscuous mode
[   42.263614][ T5229] device hsr_slave_1 entered promiscuous mode
[   42.270684][ T5229] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.278446][ T5229] Cannot create hsr debugfs directory
[   42.293570][ T5227] device hsr_slave_0 entered promiscuous mode
[   42.300387][ T5227] device hsr_slave_1 entered promiscuous mode
[   42.306867][ T5227] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.314767][ T5227] Cannot create hsr debugfs directory
[   42.325108][ T5235] team0: Port device team_slave_0 added
[   42.339243][ T5244] device hsr_slave_0 entered promiscuous mode
[   42.346163][ T5244] device hsr_slave_1 entered promiscuous mode
[   42.353082][ T5244] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.364041][ T5244] Cannot create hsr debugfs directory
[   42.378610][ T5238] device hsr_slave_0 entered promiscuous mode
[   42.388343][ T5238] device hsr_slave_1 entered promiscuous mode
[   42.395077][ T5238] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.406222][ T5238] Cannot create hsr debugfs directory
[   42.425038][ T5240] device hsr_slave_0 entered promiscuous mode
[   42.431679][ T5240] device hsr_slave_1 entered promiscuous mode
[   42.438184][ T5240] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.446620][ T5240] Cannot create hsr debugfs directory
[   42.462370][ T5235] team0: Port device team_slave_1 added
[   42.468252][ T5226] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.475665][ T5226] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.501731][ T5226] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   42.515760][ T5226] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.522920][ T5226] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.549580][ T5226] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.651087][ T5235] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.658089][ T5235] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.684529][ T5235] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   42.723812][ T5226] device hsr_slave_0 entered promiscuous mode
[   42.730581][ T5226] device hsr_slave_1 entered promiscuous mode
[   42.736986][ T5226] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.748022][ T5226] Cannot create hsr debugfs directory
[   42.759858][ T5235] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.767157][ T5235] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.793268][ T5235] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.936269][ T5235] device hsr_slave_0 entered promiscuous mode
[   42.943011][ T5235] device hsr_slave_1 entered promiscuous mode
[   42.949512][ T5235] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.957564][ T5235] Cannot create hsr debugfs directory
[   42.981819][ T5228] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   43.008802][ T5228] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   43.021555][ T5228] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   43.038037][ T5228] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   43.109611][ T5227] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   43.139246][ T5227] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   43.147841][ T5227] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   43.159611][ T5227] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   43.205146][ T5229] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   43.216967][ T5229] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   43.240918][ T5229] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   43.250888][ T5228] 8021q: adding VLAN 0 to HW filter on device bond0
[   43.263830][ T5229] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   43.293320][ T5228] 8021q: adding VLAN 0 to HW filter on device team0
[   43.303821][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   43.311957][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   43.333932][ T5240] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   43.347162][ T5240] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   43.376256][ T5227] 8021q: adding VLAN 0 to HW filter on device bond0
[   43.383824][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   43.396440][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   43.404908][ T5305] bridge0: port 1(bridge_slave_0) entered blocking state
[   43.412172][ T5305] bridge0: port 1(bridge_slave_0) entered forwarding state
[   43.421325][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   43.430002][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   43.438732][ T5305] bridge0: port 2(bridge_slave_1) entered blocking state
[   43.445940][ T5305] bridge0: port 2(bridge_slave_1) entered forwarding state
[   43.453768][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   43.462407][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   43.471702][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   43.480515][ T5240] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   43.502190][ T5240] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   43.557192][ T5227] 8021q: adding VLAN 0 to HW filter on device team0
[   43.599508][ T5228] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   43.611867][ T5228] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   43.664272][ T5229] 8021q: adding VLAN 0 to HW filter on device bond0
[   43.691085][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   43.701559][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   43.710707][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   43.718947][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   43.728254][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   43.736969][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   43.745729][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   43.753778][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   43.762038][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   43.770850][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   43.779077][   T14] bridge0: port 1(bridge_slave_0) entered blocking state
[   43.786498][   T14] bridge0: port 1(bridge_slave_0) entered forwarding state
[   43.793983][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   43.802637][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   43.811074][   T14] bridge0: port 2(bridge_slave_1) entered blocking state
[   43.818114][   T14] bridge0: port 2(bridge_slave_1) entered forwarding state
[   43.825787][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   43.835166][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   43.846261][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   43.855262][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   43.863049][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   43.887506][ T5238] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   43.903930][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   43.913280][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   43.929654][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   43.938593][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   43.947283][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   43.955094][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   43.964796][ T5229] 8021q: adding VLAN 0 to HW filter on device team0
[   43.980945][ T5227] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   43.993117][ T5227] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   44.001746][ T5238] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   44.010471][ T5247] Bluetooth: hci1: command 0x041b tx timeout
[   44.016491][ T5247] Bluetooth: hci5: command 0x041b tx timeout
[   44.017181][ T5238] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   44.023313][ T5237] Bluetooth: hci7: command 0x041b tx timeout
[   44.030265][ T5250] Bluetooth: hci2: command 0x041b tx timeout
[   44.050974][ T5238] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   44.069285][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   44.078707][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.090366][ T5250] Bluetooth: hci6: command 0x041b tx timeout
[   44.096384][ T5250] Bluetooth: hci0: command 0x041b tx timeout
[   44.109969][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.118987][   T14] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.126110][   T14] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.133998][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   44.142714][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   44.151877][   T14] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.158937][   T14] bridge0: port 2(bridge_slave_1) entered forwarding state
[   44.166799][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   44.175784][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   44.183593][ T5250] Bluetooth: hci3: command 0x041b tx timeout
[   44.189708][ T5250] Bluetooth: hci4: command 0x041b tx timeout
[   44.211630][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   44.255230][ T5228] 8021q: adding VLAN 0 to HW filter on device batadv0
[   44.281498][ T5229] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   44.292424][ T5229] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   44.307510][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   44.327115][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   44.341570][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   44.356786][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   44.367872][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   44.381235][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   44.388613][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   44.402354][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   44.416634][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   44.426704][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   44.458442][ T5240] 8021q: adding VLAN 0 to HW filter on device bond0
[   44.476132][ T5244] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   44.496911][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   44.508320][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   44.559363][ T5240] 8021q: adding VLAN 0 to HW filter on device team0
[   44.593735][ T5244] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   44.614851][ T5244] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   44.641252][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   44.648815][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   44.657621][ T5226] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   44.666410][ T5226] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   44.677914][ T5226] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   44.686172][ T5226] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   44.702604][ T5244] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   44.719022][ T5227] 8021q: adding VLAN 0 to HW filter on device batadv0
[   44.770730][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   44.778177][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   44.787595][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.797324][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.810959][   T22] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.818030][   T22] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.840400][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   44.848898][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   44.862112][   T22] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.869486][   T22] bridge0: port 2(bridge_slave_1) entered forwarding state
[   44.878109][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   44.896147][ T5229] 8021q: adding VLAN 0 to HW filter on device batadv0
[   44.945327][ T5238] 8021q: adding VLAN 0 to HW filter on device bond0
[   44.970557][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   44.978939][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   44.987095][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   44.995918][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   45.004681][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   45.015696][  T149] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   45.061833][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   45.071025][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   45.079145][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   45.087851][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   45.095522][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   45.103476][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   45.112356][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   45.131769][ T5238] 8021q: adding VLAN 0 to HW filter on device team0
[   45.175640][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   45.184493][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   45.202932][ T5240] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   45.214174][ T5240] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   45.222486][ T5235] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   45.254009][ T5228] device veth0_vlan entered promiscuous mode
[   45.261338][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   45.271780][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   45.286988][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   45.296767][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   45.305740][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   45.314562][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   45.323268][ T5306] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.330392][ T5306] bridge0: port 1(bridge_slave_0) entered forwarding state
[   45.338440][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   45.347139][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   45.356371][ T5306] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.363483][ T5306] bridge0: port 2(bridge_slave_1) entered forwarding state
[   45.371278][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   45.379268][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   45.389755][ T5227] device veth0_vlan entered promiscuous mode
[   45.396762][ T5235] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   45.427346][ T5228] device veth1_vlan entered promiscuous mode
[   45.443908][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   45.459973][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   45.475810][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   45.484538][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   45.492964][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   45.501375][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   45.509423][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   45.518743][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   45.531000][ T5227] device veth1_vlan entered promiscuous mode
[   45.546586][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   45.554687][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   45.563672][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   45.572189][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   45.581243][ T5235] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   45.601987][ T5244] 8021q: adding VLAN 0 to HW filter on device bond0
[   45.613889][ T5226] 8021q: adding VLAN 0 to HW filter on device bond0
[   45.648525][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   45.657706][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   45.672634][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   45.684985][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   45.694736][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   45.703833][ T5305] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   45.713137][ T5235] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   45.736899][ T5226] 8021q: adding VLAN 0 to HW filter on device team0
[   45.751962][ T5227] device veth0_macvtap entered promiscuous mode
[   45.761202][ T5227] device veth1_macvtap entered promiscuous mode
[   45.768866][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   45.778106][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   45.786112][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   45.794067][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   45.801859][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   45.809629][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   45.819348][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   45.829956][ T5244] 8021q: adding VLAN 0 to HW filter on device team0
[   45.842528][ T5238] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   45.854396][ T5238] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   45.915526][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   45.928846][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   45.940398][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   45.947941][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   45.956154][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   45.965106][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   45.973621][   T22] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.980947][   T22] bridge0: port 1(bridge_slave_0) entered forwarding state
[   45.989046][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   45.997707][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   46.006004][   T22] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.013084][   T22] bridge0: port 2(bridge_slave_1) entered forwarding state
[   46.021302][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   46.029723][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   46.038195][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   46.046707][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   46.055071][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   46.066747][ T5240] 8021q: adding VLAN 0 to HW filter on device batadv0
[   46.082526][ T5229] device veth0_vlan entered promiscuous mode
[   46.090968][ T5250] Bluetooth: hci5: command 0x040f tx timeout
[   46.097108][ T5250] Bluetooth: hci2: command 0x040f tx timeout
[   46.098132][ T5226] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   46.109843][ T5247] Bluetooth: hci7: command 0x040f tx timeout
[   46.113789][ T5237] Bluetooth: hci1: command 0x040f tx timeout
[   46.136061][ T5226] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   46.170387][ T5237] Bluetooth: hci0: command 0x040f tx timeout
[   46.174706][ T5228] device veth0_macvtap entered promiscuous mode
[   46.176407][ T5237] Bluetooth: hci6: command 0x040f tx timeout
[   46.201209][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   46.209436][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   46.223952][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   46.240641][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   46.248371][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.256792][ T5237] Bluetooth: hci4: command 0x040f tx timeout
[   46.260369][ T5252] Bluetooth: hci3: command 0x040f tx timeout
[   46.263548][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.277444][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   46.286314][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   46.301395][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   46.309757][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   46.321739][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   46.329760][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   46.341369][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   46.349561][ T5309] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.356741][ T5309] bridge0: port 1(bridge_slave_0) entered forwarding state
[   46.370525][ T5229] device veth1_vlan entered promiscuous mode
[   46.387569][ T5227] batman_adv: batadv0: Interface activated: batadv_slave_0
[   46.410828][ T5228] device veth1_macvtap entered promiscuous mode
[   46.429383][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   46.438316][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   46.453473][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   46.464906][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   46.476408][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   46.484675][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   46.492766][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   46.501505][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   46.510284][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   46.518852][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   46.527499][ T5309] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.534561][ T5309] bridge0: port 2(bridge_slave_1) entered forwarding state
[   46.542418][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   46.551152][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   46.562031][ T5227] batman_adv: batadv0: Interface activated: batadv_slave_1
[   46.573095][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   46.582608][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   46.591126][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   46.600679][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   46.609354][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   46.625978][ T5235] 8021q: adding VLAN 0 to HW filter on device bond0
[   46.638894][ T5228] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   46.659876][ T5228] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   46.677693][ T5228] batman_adv: batadv0: Interface activated: batadv_slave_0
[   46.687594][ T5227] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   46.699509][ T5227] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   46.708286][ T5227] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   46.717256][ T5227] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   46.731709][ T5238] 8021q: adding VLAN 0 to HW filter on device batadv0
[   46.739223][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   46.747571][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   46.758257][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   46.767534][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   46.778720][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.787926][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.807455][ T5235] 8021q: adding VLAN 0 to HW filter on device team0
[   46.818039][ T5228] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   46.829207][ T5228] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   46.839835][ T5228] batman_adv: batadv0: Interface activated: batadv_slave_1
[   46.851802][ T5229] device veth0_macvtap entered promiscuous mode
[   46.864781][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   46.873354][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   46.881290][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   46.888851][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   46.898789][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   46.907775][ T5338] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.915037][ T5338] bridge0: port 1(bridge_slave_0) entered forwarding state
[   46.923218][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   46.931953][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   46.940802][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   46.953940][ T5244] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   46.966007][ T5244] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   46.989465][ T5226] 8021q: adding VLAN 0 to HW filter on device batadv0
[   46.998875][ T5228] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   47.008611][ T5228] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   47.018163][ T5228] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   47.027448][ T5228] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   47.044796][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   47.053656][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   47.062224][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   47.071457][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   47.079869][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   47.088380][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   47.096750][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   47.104384][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   47.112285][ T5231] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   47.124171][ T5229] device veth1_macvtap entered promiscuous mode
[   47.177509][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   47.186195][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   47.195199][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   47.204749][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   47.214334][ T5309] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.221528][ T5309] bridge0: port 2(bridge_slave_1) entered forwarding state
[   47.229293][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   47.237886][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   47.246468][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   47.255230][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   47.275444][ T5229] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.289387][ T5229] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.301150][ T5229] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.311703][ T5229] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.323035][ T5229] batman_adv: batadv0: Interface activated: batadv_slave_0
[   47.332638][ T5240] device veth0_vlan entered promiscuous mode
[   47.348804][ T5235] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   47.362928][ T5235] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   47.384792][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   47.398787][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   47.407921][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   47.422984][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   47.434792][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   47.444529][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   47.453820][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   47.463520][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   47.472833][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   47.481544][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   47.489768][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   47.498312][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   47.507057][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   47.514863][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   47.526001][ T5229] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.539258][ T5229] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.550485][ T5229] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.561255][ T5229] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.572551][ T5229] batman_adv: batadv0: Interface activated: batadv_slave_1
[   47.585208][ T5240] device veth1_vlan entered promiscuous mode
[   47.599327][ T5238] device veth0_vlan entered promiscuous mode
[   47.632758][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   47.641444][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   47.649970][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   47.663487][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   47.672128][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   47.681690][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   47.689724][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   47.699627][ T5226] device veth0_vlan entered promiscuous mode
[   47.712883][ T5229] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   47.723028][ T5229] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   47.732194][ T5229] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   47.741444][ T5229] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   47.761367][ T5238] device veth1_vlan entered promiscuous mode
[   47.772367][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   47.780055][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   47.788225][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   47.796299][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   47.804531][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   47.815393][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   47.827524][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   47.843384][ T5244] 8021q: adding VLAN 0 to HW filter on device batadv0
[   47.860624][   T11] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   47.872348][   T11] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   47.897479][ T5235] 8021q: adding VLAN 0 to HW filter on device batadv0
[   47.931008][   T46] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   47.938951][   T46] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   47.955487][ T5231] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   47.963865][ T5231] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   47.971533][ T5231] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   47.978994][ T5231] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   47.987192][ T5226] device veth1_vlan entered promiscuous mode
[   48.029012][ T5238] device veth0_macvtap entered promiscuous mode
[   48.056211][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   48.066332][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   48.075717][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   48.084242][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   48.093315][ T5240] device veth0_macvtap entered promiscuous mode
[   48.102439][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   48.110931][ T5338] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   48.131877][ T5226] device veth0_macvtap entered promiscuous mode
[   48.154649][ T5238] device veth1_macvtap entered promiscuous mode
[   48.156607][   T11] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.170042][   T11] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.170991][ T5250] Bluetooth: hci2: command 0x0419 tx timeout
[   48.180286][ T5252] Bluetooth: hci7: command 0x0419 tx timeout
[   48.183889][ T5250] Bluetooth: hci5: command 0x0419 tx timeout
[   48.189259][ T5252] Bluetooth: hci1: command 0x0419 tx timeout
[   48.202472][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   48.216637][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   48.227243][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   48.236281][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   48.245350][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   48.253641][ T5252] Bluetooth: hci6: command 0x0419 tx timeout
[   48.259747][ T5252] Bluetooth: hci0: command 0x0419 tx timeout
[   48.266871][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   48.277815][   T11] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.278039][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   48.289270][   T11] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.307475][ T5226] device veth1_macvtap entered promiscuous mode
[   48.321839][ T5240] device veth1_macvtap entered promiscuous mode
[   48.330358][ T5237] Bluetooth: hci3: command 0x0419 tx timeout
[   48.335648][ T5240] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.347130][ T5252] Bluetooth: hci4: command 0x0419 tx timeout
[   48.353711][ T5240] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.367487][ T5240] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.384668][ T5240] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.394794][ T5240] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.409116][ T5240] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.421739][ T5240] batman_adv: batadv0: Interface activated: batadv_slave_0
[   48.441710][ T5240] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.453151][ T5240] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.463323][ T5240] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.477766][ T5240] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.488157][ T5240] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.501089][ T5240] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.512309][ T5240] batman_adv: batadv0: Interface activated: batadv_slave_1
[   48.525909][ T5240] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   48.535176][ T5240] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   48.544735][ T5240] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   48.553839][ T5240] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   48.565475][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   48.575803][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   48.584382][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   48.592481][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   48.601300][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   48.609886][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   48.619030][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   48.627912][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   48.649539][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   48.659288][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   48.681692][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   48.726281][   T56] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.740237][ T5235] device veth0_vlan entered promiscuous mode
[   48.755423][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.792229][   T56] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.816577][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.861416][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.887279][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.924680][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.968208][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.999856][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.018224][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.032381][ T5238] batman_adv: batadv0: Interface activated: batadv_slave_0
[   49.056518][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   49.072909][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   49.083830][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.095390][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   49.129224][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   49.152024][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   49.175220][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   49.205303][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.224395][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.257320][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.286022][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.324576][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.374291][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
2024/04/16 17:02:06 executed programs: 8
[   49.465943][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.477428][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.489287][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.506104][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.529325][ T5226] batman_adv: batadv0: Interface activated: batadv_slave_0
[   49.618362][ T5244] device veth0_vlan entered promiscuous mode
[   49.618793][   T41] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.632061][ T5244] device veth1_vlan entered promiscuous mode
[   49.660712][ T5235] device veth1_vlan entered promiscuous mode
[   49.671294][   T41] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.685899][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   49.715934][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   49.746980][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   49.810800][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   49.861901][ T5335] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.983434][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.002513][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.036051][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.087441][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.102184][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.113681][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.124820][ T5238] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.139089][ T5238] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.156407][ T5238] batman_adv: batadv0: Interface activated: batadv_slave_1
[   50.188728][ T5314] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   50.211381][ T5314] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   50.254928][ T5314] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   50.283104][ T5314] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   50.311687][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.327465][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.345338][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.361372][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.374832][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.399521][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.431709][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.458834][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.610779][ T5226] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.621683][ T5226] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.646376][ T5226] batman_adv: batadv0: Interface activated: batadv_slave_1
[   50.681157][ T5235] device veth0_macvtap entered promiscuous mode
[   50.707951][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   50.725059][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   50.759910][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   50.832256][ T5238] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   50.859929][ T5238] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   50.927911][ T5238] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   50.992515][ T5238] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.072387][ T5226] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.088651][ T5226] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.128847][ T5226] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.154697][ T5226] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.251758][ T5235] device veth1_macvtap entered promiscuous mode
[   51.267969][ T5244] device veth0_macvtap entered promiscuous mode
[   51.299420][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.308700][   T46] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   51.319291][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.334194][   T46] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   51.376883][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.415328][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.452155][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.558701][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.568623][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.585566][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.618430][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.731864][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.818606][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.843307][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.892331][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.952611][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.022979][ T5235] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.104451][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.129143][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.168826][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.239402][ T5309] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.623623][ T5244] device veth1_macvtap entered promiscuous mode
[   52.654159][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.666600][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.679102][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.776161][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.826872][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.837519][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.848077][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.859115][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.869089][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.881445][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.891730][ T5235] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.902286][ T5235] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.913326][ T5235] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.924667][   T56] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.927688][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.933949][   T56] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.961753][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.981860][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.000297][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.013428][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.024478][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.037575][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.048330][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.059809][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.074678][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.084971][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.095955][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.106000][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.116619][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.127471][ T5244] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.142666][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.171029][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.179500][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.189071][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.197597][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.207595][ T5235] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.230197][ T5235] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.239017][ T5235] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.256426][ T5235] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.274943][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.298351][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.311671][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.327592][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.340275][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.358808][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.368859][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.392378][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.415813][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.428834][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.446748][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.464362][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.478502][ T5244] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.498594][ T5244] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.519876][ T5244] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.545044][ T4624] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.560880][ T4624] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.591655][ T6908] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.605708][ T6908] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.617022][ T5244] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.635997][ T5244] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.664052][ T5244] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.680260][ T5244] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.719797][ T5303] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.786502][ T6908] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.807078][ T6908] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.842881][   T46] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.902792][ T5306] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.903372][T10205] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.980479][   T46] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.039860][T10205] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.066404][   T46] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.113130][T10205] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.126607][   T46] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.145604][T10205] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.165413][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.176945][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.184896][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.192812][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.244323][ T6908] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.255396][ T6908] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.279224][ T4624] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.326605][   T11] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.352452][   T11] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.384919][ T5307] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
2024/04/16 17:02:12 executed programs: 20
2024/04/16 17:02:17 executed programs: 55
2024/04/16 17:02:22 executed programs: 92
2024/04/16 17:02:27 executed programs: 127
[   70.413581][  T152] cfg80211: failed to load regulatory.db
[   70.417335][ T1246] ieee802154 phy0 wpan0: encryption failed: -22
[   70.436462][ T1246] ieee802154 phy1 wpan1: encryption failed: -22
2024/04/16 17:02:32 executed programs: 168
2024/04/16 17:02:37 executed programs: 210
[   85.848348][    C0] hrtimer: interrupt took 305040 ns
2024/04/16 17:02:43 executed programs: 245
[   89.066465][T17109] ==================================================================
[   89.074580][T17109] BUG: KASAN: use-after-free in io_wq_worker_running+0x114/0x130
[   89.082310][T17109] Read of size 4 at addr ffff88801d720804 by task iou-wrk-17053/17109
[   89.090652][T17109] 
[   89.092975][T17109] CPU: 0 PID: 17109 Comm: iou-wrk-17053 Not tainted 6.1.0-syzkaller-09960-g12521a5d5cb7 #0
[   89.103145][T17109] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[   89.113206][T17109] Call Trace:
[   89.116475][T17109]  <TASK>
[   89.119515][T17109]  dump_stack_lvl+0x100/0x178
[   89.124199][T17109]  print_report+0x167/0x46c
[   89.128728][T17109]  ? __virt_addr_valid+0x5e/0x2d0
[   89.133753][T17109]  ? __phys_addr+0xc6/0x140
[   89.138250][T17109]  ? io_wq_worker_running+0x114/0x130
[   89.143621][T17109]  ? io_wq_worker_running+0x114/0x130
[   89.148983][T17109]  kasan_report+0xbf/0x1e0
[   89.153420][T17109]  ? io_wq_worker_running+0x114/0x130
[   89.159045][T17109]  io_wq_worker_running+0x114/0x130
[   89.164262][T17109]  schedule_preempt_disabled+0x13/0x20
[   89.169714][T17109]  __mutex_lock+0x914/0x12e0
[   89.174310][T17109]  ? io_wq_submit_work+0x5f0/0xd80
[   89.179407][T17109]  ? wake_up_q+0x8f/0xf0
[   89.183639][T17109]  ? mutex_lock_io_nested+0x1140/0x1140
[   89.189178][T17109]  ? io_worker_handle_work+0x58c/0x19b0
[   89.194709][T17109]  ? reacquire_held_locks+0x4a0/0x4a0
[   89.200075][T17109]  ? io_wq_submit_work+0x5f0/0xd80
[   89.205193][T17109]  io_wq_submit_work+0x5f0/0xd80
[   89.210220][T17109]  io_worker_handle_work+0x6d4/0x19b0
[   89.215597][T17109]  ? reacquire_held_locks+0x4a0/0x4a0
[   89.220959][T17109]  io_wqe_worker+0x675/0xe50
[   89.225544][T17109]  ? io_worker_handle_work+0x19b0/0x19b0
[   89.231364][T17109]  ? ret_from_fork+0x8/0x30
[   89.236295][T17109]  ? reacquire_held_locks+0x4a0/0x4a0
[   89.241655][T17109]  ? do_raw_spin_lock+0x12e/0x2b0
[   89.246669][T17109]  ? rwlock_bug.part.0+0x90/0x90
[   89.251596][T17109]  ? lockdep_hardirqs_on_prepare+0x17f/0x410
[   89.257739][T17109]  ? io_worker_handle_work+0x19b0/0x19b0
[   89.263359][T17109]  ret_from_fork+0x1f/0x30
[   89.267769][T17109]  </TASK>
[   89.270795][T17109] 
[   89.273101][T17109] Allocated by task 17053:
[   89.277491][T17109]  kasan_save_stack+0x20/0x40
[   89.282161][T17109]  kasan_set_track+0x25/0x30
[   89.286760][T17109]  __kasan_kmalloc+0xa5/0xb0
[   89.291356][T17109]  create_io_worker+0x109/0x630
[   89.296288][T17109]  io_wqe_enqueue+0x6d0/0xbe0
[   89.300948][T17109]  io_queue_iowq+0x282/0x5b0
[   89.305518][T17109]  io_queue_sqe_fallback+0xf7/0x190
[   89.310790][T17109]  io_submit_sqes+0x11df/0x1f90
[   89.315622][T17109]  __do_sys_io_uring_enter+0xc80/0x2540
[   89.321150][T17109]  do_syscall_64+0x38/0xb0
[   89.325550][T17109]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   89.331541][T17109] 
[   89.333854][T17109] Freed by task 17109:
[   89.337927][T17109]  kasan_save_stack+0x20/0x40
[   89.342601][T17109]  kasan_set_track+0x25/0x30
[   89.347174][T17109]  kasan_save_free_info+0x2e/0x40
[   89.352181][T17109]  ____kasan_slab_free+0x15e/0x1b0
[   89.357280][T17109]  slab_free_freelist_hook+0x10b/0x1e0
[   89.362900][T17109]  __kmem_cache_free+0xaf/0x3c0
[   89.367746][T17109]  io_queue_worker_create+0x53d/0x640
[   89.373124][T17109]  io_wqe_dec_running+0x1e5/0x240
[   89.378138][T17109]  io_wq_worker_sleeping+0xa6/0xc0
[   89.383338][T17109]  schedule+0x178/0x1c0
[   89.387501][T17109]  schedule_preempt_disabled+0x13/0x20
[   89.392982][T17109]  __mutex_lock+0x914/0x12e0
[   89.397556][T17109]  io_wq_submit_work+0x5f0/0xd80
[   89.402485][T17109]  io_worker_handle_work+0x6d4/0x19b0
[   89.408386][T17109]  io_wqe_worker+0x675/0xe50
[   89.412963][T17109]  ret_from_fork+0x1f/0x30
[   89.417364][T17109] 
[   89.419672][T17109] Last potentially related work creation:
[   89.425385][T17109]  kasan_save_stack+0x20/0x40
[   89.430080][T17109]  __kasan_record_aux_stack+0xbf/0xd0
[   89.435511][T17109]  task_work_add+0x7f/0x290
[   89.440019][T17109]  io_queue_worker_create+0x3fd/0x640
[   89.445397][T17109]  io_wqe_dec_running+0x1e5/0x240
[   89.450408][T17109]  io_wq_worker_sleeping+0xa6/0xc0
[   89.455509][T17109]  schedule+0x178/0x1c0
[   89.459681][T17109]  schedule_preempt_disabled+0x13/0x20
[   89.465132][T17109]  __mutex_lock+0x914/0x12e0
[   89.469704][T17109]  io_wq_submit_work+0x5f0/0xd80
[   89.474639][T17109]  io_worker_handle_work+0x6d4/0x19b0
[   89.480006][T17109]  io_wqe_worker+0x675/0xe50
[   89.484584][T17109]  ret_from_fork+0x1f/0x30
[   89.489008][T17109] 
[   89.491320][T17109] The buggy address belongs to the object at ffff88801d720800
[   89.491320][T17109]  which belongs to the cache kmalloc-512 of size 512
[   89.505378][T17109] The buggy address is located 4 bytes inside of
[   89.505378][T17109]  512-byte region [ffff88801d720800, ffff88801d720a00)
[   89.518902][T17109] 
[   89.521218][T17109] The buggy address belongs to the physical page:
[   89.527614][T17109] page:ffffea000075c800 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d720
[   89.537794][T17109] head:ffffea000075c800 order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
[   89.547843][T17109] anon flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
[   89.556263][T17109] raw: 00fff00000010200 ffff888012441c80 0000000000000000 0000000000000001
[   89.564943][T17109] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
[   89.573602][T17109] page dumped because: kasan: bad access detected
[   89.580022][T17109] page_owner tracks the page as allocated
[   89.585722][T17109] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 8843, tgid 8800 (syz-executor.7), ts 81242339850, free_ts 79371908689
[   89.607257][T17109]  get_page_from_freelist+0x10aa/0x2d40
[   89.612794][T17109]  __alloc_pages+0x1c8/0x5c0
[   89.617371][T17109]  allocate_slab+0xa1/0x340
[   89.621867][T17109]  ___slab_alloc+0x89a/0x1400
[   89.626537][T17109]  __slab_alloc.constprop.0+0x56/0xa0
[   89.631902][T17109]  __kmem_cache_alloc_node+0x128/0x430
[   89.637356][T17109]  kmalloc_node_trace+0x22/0x60
[   89.642209][T17109]  create_io_worker+0x109/0x630
[   89.647050][T17109]  io_wqe_enqueue+0x6d0/0xbe0
[   89.651711][T17109]  io_queue_iowq+0x282/0x5b0
[   89.656315][T17109]  io_queue_sqe_fallback+0xf7/0x190
[   89.661496][T17109]  io_submit_sqes+0x11df/0x1f90
[   89.666328][T17109]  __do_sys_io_uring_enter+0xc80/0x2540
[   89.671887][T17109]  do_syscall_64+0x38/0xb0
[   89.676311][T17109]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   89.682211][T17109] page last free stack trace:
[   89.686864][T17109]  free_pcp_prepare+0x44c/0x9a0
[   89.691947][T17109]  free_unref_page+0x1c/0x4d0
[   89.696628][T17109]  __unfreeze_partials+0x18d/0x1b0
[   89.701764][T17109]  qlist_free_all+0x6a/0x170
[   89.706333][T17109]  kasan_quarantine_reduce+0x188/0x1d0
[   89.711782][T17109]  __kasan_slab_alloc+0x68/0x90
[   89.716613][T17109]  kmem_cache_alloc+0x15b/0x400
[   89.721447][T17109]  getname_flags.part.0+0x50/0x4d0
[   89.726634][T17109]  getname+0x90/0xe0
[   89.730557][T17109]  do_sys_openat2+0xf5/0x4c0
[   89.735148][T17109]  __x64_sys_openat+0x175/0x210
[   89.739993][T17109]  do_syscall_64+0x38/0xb0
[   89.744417][T17109]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   89.750319][T17109] 
[   89.752644][T17109] Memory state around the buggy address:
[   89.758271][T17109]  ffff88801d720700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   89.766422][T17109]  ffff88801d720780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   89.774724][T17109] >ffff88801d720800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   89.782786][T17109]                    ^
[   89.786867][T17109]  ffff88801d720880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   89.794943][T17109]  ffff88801d720900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   89.803013][T17109] ==================================================================
[   89.815979][T17109] Kernel panic - not syncing: panic_on_warn set ...
[   89.822576][T17109] CPU: 0 PID: 17109 Comm: iou-wrk-17053 Not tainted 6.1.0-syzkaller-09960-g12521a5d5cb7 #0
[   89.832555][T17109] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[   89.842602][T17109] Call Trace:
[   89.845875][T17109]  <TASK>
[   89.848975][T17109]  dump_stack_lvl+0x100/0x178
[   89.854716][T17109]  panic+0x2c4/0x60f
[   89.858613][T17109]  ? panic_print_sys_info.part.0+0x110/0x110
[   89.864591][T17109]  ? preempt_schedule_thunk+0x1a/0x1c
[   89.869958][T17109]  ? preempt_schedule_thunk+0x1a/0x1c
[   89.875314][T17109]  ? preempt_schedule_common+0x59/0xd0
[   89.880782][T17109]  ? io_wq_worker_running+0x114/0x130
[   89.886167][T17109]  ? preempt_schedule_thunk+0x1a/0x1c
[   89.891545][T17109]  ? io_wq_worker_running+0x114/0x130
[   89.897021][T17109]  end_report.part.0+0x3f/0x7c
[   89.901808][T17109]  kasan_report.cold+0xa/0xf
[   89.906568][T17109]  ? io_wq_worker_running+0x114/0x130
[   89.911955][T17109]  io_wq_worker_running+0x114/0x130
[   89.917951][T17109]  schedule_preempt_disabled+0x13/0x20
[   89.923504][T17109]  __mutex_lock+0x914/0x12e0
[   89.928195][T17109]  ? io_wq_submit_work+0x5f0/0xd80
[   89.933383][T17109]  ? wake_up_q+0x8f/0xf0
[   89.937662][T17109]  ? mutex_lock_io_nested+0x1140/0x1140
[   89.943473][T17109]  ? io_worker_handle_work+0x58c/0x19b0
[   89.949013][T17109]  ? reacquire_held_locks+0x4a0/0x4a0
[   89.954375][T17109]  ? io_wq_submit_work+0x5f0/0xd80
[   89.959477][T17109]  io_wq_submit_work+0x5f0/0xd80
[   89.964410][T17109]  io_worker_handle_work+0x6d4/0x19b0
[   89.969945][T17109]  ? reacquire_held_locks+0x4a0/0x4a0
[   89.975315][T17109]  io_wqe_worker+0x675/0xe50
[   89.979892][T17109]  ? io_worker_handle_work+0x19b0/0x19b0
[   89.985529][T17109]  ? ret_from_fork+0x8/0x30
[   89.990905][T17109]  ? reacquire_held_locks+0x4a0/0x4a0
[   89.996261][T17109]  ? do_raw_spin_lock+0x12e/0x2b0
[   90.001270][T17109]  ? rwlock_bug.part.0+0x90/0x90
[   90.006197][T17109]  ? lockdep_hardirqs_on_prepare+0x17f/0x410
[   90.012199][T17109]  ? io_worker_handle_work+0x19b0/0x19b0
[   90.017819][T17109]  ret_from_fork+0x1f/0x30
[   90.022237][T17109]  </TASK>
[   90.025460][T17109] Kernel Offset: disabled
[   90.029779][T17109] Rebooting in 86400 seconds..
