Warning: Permanently added '10.128.15.196' (ED25519) to the list of known hosts.
2024/04/16 16:39:19 ignoring optional flag "sandboxArg"="0"
2024/04/16 16:39:19 parsed 1 programs
2024/04/16 16:39:22 executed programs: 0
[   69.634140][ T3514] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   70.747669][ T3544] chnl_net:caif_netlink_parms(): no params data found
[   70.759452][ T3535] chnl_net:caif_netlink_parms(): no params data found
[   70.769668][ T3537] chnl_net:caif_netlink_parms(): no params data found
[   70.784294][ T3549] chnl_net:caif_netlink_parms(): no params data found
[   70.793967][ T3546] chnl_net:caif_netlink_parms(): no params data found
[   70.868703][ T3550] chnl_net:caif_netlink_parms(): no params data found
[   70.898614][ T3536] chnl_net:caif_netlink_parms(): no params data found
[   70.944938][ T3552] chnl_net:caif_netlink_parms(): no params data found
[   71.152422][ T3535] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.160479][ T3535] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.168912][ T3535] device bridge_slave_0 entered promiscuous mode
[   71.216608][ T3544] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.224475][ T3544] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.233159][ T3544] device bridge_slave_0 entered promiscuous mode
[   71.246765][ T3535] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.254236][ T3535] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.263485][ T3535] device bridge_slave_1 entered promiscuous mode
[   71.272770][ T3537] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.280354][ T3537] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.289965][ T3537] device bridge_slave_0 entered promiscuous mode
[   71.317645][ T3546] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.326314][ T3546] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.334556][ T3546] device bridge_slave_0 entered promiscuous mode
[   71.347325][ T3549] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.355188][ T3549] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.363884][ T3549] device bridge_slave_0 entered promiscuous mode
[   71.372533][ T3544] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.379663][ T3544] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.388385][ T3544] device bridge_slave_1 entered promiscuous mode
[   71.414988][ T3537] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.423008][ T3537] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.432116][ T3537] device bridge_slave_1 entered promiscuous mode
[   71.439447][ T3550] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.446868][ T3550] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.455364][ T3550] device bridge_slave_0 entered promiscuous mode
[   71.463804][ T3536] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.471419][ T3536] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.479646][ T3536] device bridge_slave_0 entered promiscuous mode
[   71.487426][ T3546] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.496070][ T3546] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.505620][ T3546] device bridge_slave_1 entered promiscuous mode
[   71.513753][ T3549] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.521063][ T3549] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.529168][ T3549] device bridge_slave_1 entered promiscuous mode
[   71.569212][ T3550] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.577550][ T3550] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.585942][ T3550] device bridge_slave_1 entered promiscuous mode
[   71.593893][ T3536] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.601472][ T3536] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.609640][ T3536] device bridge_slave_1 entered promiscuous mode
[   71.642543][ T3552] bridge0: port 1(bridge_slave_0) entered blocking state
[   71.649932][ T3552] bridge0: port 1(bridge_slave_0) entered disabled state
[   71.658173][ T3552] device bridge_slave_0 entered promiscuous mode
[   71.674539][ T1359] ieee802154 phy0 wpan0: encryption failed: -22
[   71.677065][ T3535] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.682328][ T1359] ieee802154 phy1 wpan1: encryption failed: -22
[   71.741765][ T3544] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.753231][ T3552] bridge0: port 2(bridge_slave_1) entered blocking state
[   71.760841][ T3552] bridge0: port 2(bridge_slave_1) entered disabled state
[   71.769458][ T3552] device bridge_slave_1 entered promiscuous mode
[   71.779743][ T3535] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.791321][ T3537] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.821251][ T3546] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.833204][ T3549] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.845961][ T3544] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.875786][ T3537] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.887842][ T3550] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.900101][ T3536] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   71.912857][ T3546] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.925972][ T3549] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.970951][ T3550] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.984122][ T3536] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   71.992670][   T39] Bluetooth: hci3: command 0x0409 tx timeout
[   71.995032][    T7] Bluetooth: hci2: command 0x0409 tx timeout
[   72.015475][    T7] Bluetooth: hci0: command 0x0409 tx timeout
[   72.021883][    T7] Bluetooth: hci1: command 0x0409 tx timeout
[   72.051411][ T3544] team0: Port device team_slave_0 added
[   72.060401][ T3552] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   72.073121][ T3535] team0: Port device team_slave_0 added
[   72.086683][   T39] Bluetooth: hci6: command 0x0409 tx timeout
[   72.094508][   T39] Bluetooth: hci4: command 0x0409 tx timeout
[   72.107519][   T39] Bluetooth: hci5: command 0x0409 tx timeout
[   72.118409][ T3537] team0: Port device team_slave_0 added
[   72.151383][    T7] Bluetooth: hci7: command 0x0409 tx timeout
[   72.159745][ T3546] team0: Port device team_slave_0 added
[   72.177906][ T3544] team0: Port device team_slave_1 added
[   72.185781][ T3552] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   72.198329][ T3535] team0: Port device team_slave_1 added
[   72.206192][ T3537] team0: Port device team_slave_1 added
[   72.231876][ T3546] team0: Port device team_slave_1 added
[   72.241884][ T3549] team0: Port device team_slave_0 added
[   72.285774][ T3550] team0: Port device team_slave_0 added
[   72.296116][ T3536] team0: Port device team_slave_0 added
[   72.312625][ T3549] team0: Port device team_slave_1 added
[   72.356348][ T3550] team0: Port device team_slave_1 added
[   72.365692][ T3536] team0: Port device team_slave_1 added
[   72.391078][ T3544] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.398088][ T3544] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.424791][ T3544] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   72.441137][ T3552] team0: Port device team_slave_0 added
[   72.448683][ T3535] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.456201][ T3535] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.484224][ T3535] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   72.497338][ T3537] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.504990][ T3537] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.533097][ T3537] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   72.565124][ T3546] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.572545][ T3546] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.598688][ T3546] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   72.621799][ T3544] batman_adv: batadv0: Adding interface: batadv_slave_1
[   72.628780][ T3544] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.655218][ T3544] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   72.669432][ T3552] team0: Port device team_slave_1 added
[   72.676719][ T3535] batman_adv: batadv0: Adding interface: batadv_slave_1
[   72.683915][ T3535] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.711719][ T3535] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   72.724147][ T3537] batman_adv: batadv0: Adding interface: batadv_slave_1
[   72.732088][ T3537] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.760343][ T3537] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   72.785609][ T3546] batman_adv: batadv0: Adding interface: batadv_slave_1
[   72.793403][ T3546] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.821259][ T3546] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   72.833473][ T3549] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.840807][ T3549] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.869106][ T3549] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   72.917351][ T3550] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.924579][ T3550] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.951213][ T3550] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   72.963383][ T3536] batman_adv: batadv0: Adding interface: batadv_slave_0
[   72.970355][ T3536] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   72.996754][ T3536] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   73.010633][ T3536] batman_adv: batadv0: Adding interface: batadv_slave_1
[   73.017908][ T3536] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   73.055020][ T3536] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   73.069766][ T3549] batman_adv: batadv0: Adding interface: batadv_slave_1
[   73.077197][ T3549] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   73.104121][ T3549] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   73.161658][ T3550] batman_adv: batadv0: Adding interface: batadv_slave_1
[   73.168730][ T3550] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   73.197485][ T3550] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   73.279149][ T3552] batman_adv: batadv0: Adding interface: batadv_slave_0
[   73.288946][ T3552] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   73.317112][ T3552] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   73.382265][ T3544] device hsr_slave_0 entered promiscuous mode
[   73.392338][ T3544] device hsr_slave_1 entered promiscuous mode
[   73.400449][ T3552] batman_adv: batadv0: Adding interface: batadv_slave_1
[   73.408459][ T3552] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   73.437736][ T3552] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   73.452729][ T3535] device hsr_slave_0 entered promiscuous mode
[   73.460268][ T3535] device hsr_slave_1 entered promiscuous mode
[   73.468385][ T3535] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.476707][ T3535] Cannot create hsr debugfs directory
[   73.486565][ T3537] device hsr_slave_0 entered promiscuous mode
[   73.494085][ T3537] device hsr_slave_1 entered promiscuous mode
[   73.503886][ T3537] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.511703][ T3537] Cannot create hsr debugfs directory
[   73.528523][ T3546] device hsr_slave_0 entered promiscuous mode
[   73.536549][ T3546] device hsr_slave_1 entered promiscuous mode
[   73.543540][ T3546] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.551712][ T3546] Cannot create hsr debugfs directory
[   73.561314][ T3536] device hsr_slave_0 entered promiscuous mode
[   73.568281][ T3536] device hsr_slave_1 entered promiscuous mode
[   73.575668][ T3536] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.583524][ T3536] Cannot create hsr debugfs directory
[   73.592986][ T3549] device hsr_slave_0 entered promiscuous mode
[   73.601267][ T3549] device hsr_slave_1 entered promiscuous mode
[   73.607914][ T3549] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.615881][ T3549] Cannot create hsr debugfs directory
[   73.716999][ T3550] device hsr_slave_0 entered promiscuous mode
[   73.724393][ T3550] device hsr_slave_1 entered promiscuous mode
[   73.731617][ T3550] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.739595][ T3550] Cannot create hsr debugfs directory
[   73.898235][ T3552] device hsr_slave_0 entered promiscuous mode
[   73.906007][ T3552] device hsr_slave_1 entered promiscuous mode
[   73.914709][ T3552] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   73.922678][ T3552] Cannot create hsr debugfs directory
[   74.071374][    T7] Bluetooth: hci1: command 0x041b tx timeout
[   74.077613][    T7] Bluetooth: hci0: command 0x041b tx timeout
[   74.087365][    T7] Bluetooth: hci2: command 0x041b tx timeout
[   74.093785][    T7] Bluetooth: hci3: command 0x041b tx timeout
[   74.162335][   T39] Bluetooth: hci5: command 0x041b tx timeout
[   74.171214][   T39] Bluetooth: hci4: command 0x041b tx timeout
[   74.177899][   T39] Bluetooth: hci6: command 0x041b tx timeout
[   74.242363][   T20] Bluetooth: hci7: command 0x041b tx timeout
[   74.441436][ T3546] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   74.457476][ T3546] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   74.477909][ T3546] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   74.491237][ T3546] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   74.526794][ T3535] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   74.540700][ T3535] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   74.553060][ T3535] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   74.564063][ T3535] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   74.676855][ T3544] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   74.702525][ T3544] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   74.715417][ T3544] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   74.732481][ T3544] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   74.763926][ T3546] 8021q: adding VLAN 0 to HW filter on device bond0
[   74.821702][ T3535] 8021q: adding VLAN 0 to HW filter on device bond0
[   74.835291][ T3546] 8021q: adding VLAN 0 to HW filter on device team0
[   74.853716][ T3606] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   74.865538][ T3606] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   74.906258][ T3549] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   74.918258][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   74.928655][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   74.939134][   T20] bridge0: port 1(bridge_slave_0) entered blocking state
[   74.947580][   T20] bridge0: port 1(bridge_slave_0) entered forwarding state
[   74.957804][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   74.966711][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   74.977805][ T3535] 8021q: adding VLAN 0 to HW filter on device team0
[   75.000564][ T3549] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   75.012601][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   75.022074][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   75.031625][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   75.041954][ T1053] bridge0: port 2(bridge_slave_1) entered blocking state
[   75.049265][ T1053] bridge0: port 2(bridge_slave_1) entered forwarding state
[   75.058650][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   75.090811][ T3549] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   75.103643][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   75.120646][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   75.130933][ T3610] bridge0: port 1(bridge_slave_0) entered blocking state
[   75.138822][ T3610] bridge0: port 1(bridge_slave_0) entered forwarding state
[   75.148222][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   75.158174][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   75.168898][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   75.178279][ T3610] bridge0: port 2(bridge_slave_1) entered blocking state
[   75.186041][ T3610] bridge0: port 2(bridge_slave_1) entered forwarding state
[   75.195507][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   75.204952][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   75.236266][ T3549] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   75.268026][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   75.280262][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   75.291655][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   75.302609][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   75.312305][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   75.322439][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   75.373147][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   75.384691][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   75.395451][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   75.405062][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   75.415376][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   75.424790][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   75.435461][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   75.444924][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   75.464809][ T3535] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   75.481962][ T3535] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   75.502961][ T3537] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   75.514383][ T3537] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   75.525941][ T3537] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   75.536224][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   75.545496][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   75.555110][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   75.565422][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   75.575575][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   75.588401][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   75.603831][ T3550] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   75.623888][ T3546] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   75.639990][ T3537] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   75.673111][ T3550] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   75.726914][ T3550] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   75.767575][ T3544] 8021q: adding VLAN 0 to HW filter on device bond0
[   75.787343][ T3550] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   75.890767][ T3544] 8021q: adding VLAN 0 to HW filter on device team0
[   75.935811][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   75.951986][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   75.960247][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   75.970485][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   75.980304][ T3614] bridge0: port 1(bridge_slave_0) entered blocking state
[   75.987672][ T3614] bridge0: port 1(bridge_slave_0) entered forwarding state
[   76.036738][ T3536] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   76.058043][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   76.066840][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   76.076616][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   76.085403][ T3607] bridge0: port 2(bridge_slave_1) entered blocking state
[   76.092598][ T3607] bridge0: port 2(bridge_slave_1) entered forwarding state
[   76.100514][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   76.131348][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   76.139265][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   76.154002][ T3611] Bluetooth: hci3: command 0x040f tx timeout
[   76.161191][ T3611] Bluetooth: hci2: command 0x040f tx timeout
[   76.167705][ T3611] Bluetooth: hci0: command 0x040f tx timeout
[   76.174152][ T3611] Bluetooth: hci1: command 0x040f tx timeout
[   76.180494][ T3536] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   76.195716][ T3536] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   76.209777][ T3536] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   76.220698][ T3535] 8021q: adding VLAN 0 to HW filter on device batadv0
[   76.228415][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   76.250485][ T3537] 8021q: adding VLAN 0 to HW filter on device bond0
[   76.251451][ T3610] Bluetooth: hci6: command 0x040f tx timeout
[   76.264994][ T3610] Bluetooth: hci4: command 0x040f tx timeout
[   76.271624][ T3610] Bluetooth: hci5: command 0x040f tx timeout
[   76.278790][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   76.289598][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   76.299030][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   76.307913][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   76.328373][ T3611] Bluetooth: hci7: command 0x040f tx timeout
[   76.351971][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   76.364809][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   76.373601][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   76.381628][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   76.390356][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   76.404617][ T3544] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   76.417473][ T3544] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   76.428452][ T3549] 8021q: adding VLAN 0 to HW filter on device bond0
[   76.474797][ T3546] 8021q: adding VLAN 0 to HW filter on device batadv0
[   76.498411][ T3611] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   76.518165][ T3611] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   76.532812][ T3611] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   76.540661][ T3611] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   76.563771][ T3552] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   76.578981][ T3552] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   76.604098][ T3537] 8021q: adding VLAN 0 to HW filter on device team0
[   76.639995][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   76.659498][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   76.676108][ T3549] 8021q: adding VLAN 0 to HW filter on device team0
[   76.689313][ T3552] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   76.700525][ T3552] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   76.743429][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   76.762212][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   76.778025][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   76.790410][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   76.799863][    T5] bridge0: port 1(bridge_slave_0) entered blocking state
[   76.807375][    T5] bridge0: port 1(bridge_slave_0) entered forwarding state
[   76.831795][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   76.848482][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   76.858200][    T5] bridge0: port 2(bridge_slave_1) entered blocking state
[   76.867710][    T5] bridge0: port 2(bridge_slave_1) entered forwarding state
[   76.933358][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   76.944216][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   76.955096][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   76.964797][ T3607] bridge0: port 1(bridge_slave_0) entered blocking state
[   76.972525][ T3607] bridge0: port 1(bridge_slave_0) entered forwarding state
[   76.981724][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   76.991366][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   77.000764][ T3607] bridge0: port 2(bridge_slave_1) entered blocking state
[   77.008561][ T3607] bridge0: port 2(bridge_slave_1) entered forwarding state
[   77.017342][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   77.027358][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   77.036798][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   77.046161][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   77.088480][ T3550] 8021q: adding VLAN 0 to HW filter on device bond0
[   77.098735][ T3535] device veth0_vlan entered promiscuous mode
[   77.112990][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   77.121700][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   77.129884][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   77.138236][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   77.147651][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   77.157311][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   77.167692][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   77.176036][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   77.239932][ T3544] 8021q: adding VLAN 0 to HW filter on device batadv0
[   77.257810][ T3535] device veth1_vlan entered promiscuous mode
[   77.291697][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   77.303379][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   77.313964][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   77.324993][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   77.335050][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   77.343762][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   77.353449][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   77.364040][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   77.372994][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   77.389094][ T3546] device veth0_vlan entered promiscuous mode
[   77.404213][ T3550] 8021q: adding VLAN 0 to HW filter on device team0
[   77.459524][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   77.471906][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   77.481490][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   77.489720][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   77.498688][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   77.508042][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   77.580144][ T3546] device veth1_vlan entered promiscuous mode
[   77.588825][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   77.599847][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   77.608339][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   77.617373][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   77.626772][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   77.635892][ T3257] bridge0: port 1(bridge_slave_0) entered blocking state
[   77.643475][ T3257] bridge0: port 1(bridge_slave_0) entered forwarding state
[   77.651899][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   77.661094][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   77.669661][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   77.678883][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   77.688929][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   77.698063][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   77.707498][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   77.724893][ T3537] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   77.788573][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   77.800777][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   77.811393][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   77.821778][ T1053] bridge0: port 2(bridge_slave_1) entered blocking state
[   77.828868][ T1053] bridge0: port 2(bridge_slave_1) entered forwarding state
[   77.840330][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   77.849848][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   77.859322][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   77.893487][ T3544] device veth0_vlan entered promiscuous mode
[   77.923305][ T3549] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   77.938043][ T3549] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   77.963788][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   77.974113][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   77.983553][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   78.001669][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   78.010352][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   78.023450][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   78.032722][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   78.042115][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   78.052142][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   78.062346][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   78.072510][ T2176] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   78.114553][ T3546] device veth0_macvtap entered promiscuous mode
[   78.136565][ T3552] 8021q: adding VLAN 0 to HW filter on device bond0
[   78.146416][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   78.170688][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   78.180393][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   78.189339][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   78.210676][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   78.220137][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   78.230739][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   78.240545][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   78.249977][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   78.259404][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   78.271301][ T1053] Bluetooth: hci1: command 0x0419 tx timeout
[   78.275534][ T3536] 8021q: adding VLAN 0 to HW filter on device bond0
[   78.277605][ T1053] Bluetooth: hci0: command 0x0419 tx timeout
[   78.302504][ T1053] Bluetooth: hci2: command 0x0419 tx timeout
[   78.308697][ T3535] device veth0_macvtap entered promiscuous mode
[   78.316559][ T1053] Bluetooth: hci3: command 0x0419 tx timeout
[   78.324123][ T1053] Bluetooth: hci5: command 0x0419 tx timeout
[   78.330353][ T1053] Bluetooth: hci4: command 0x0419 tx timeout
[   78.338753][ T3535] device veth1_macvtap entered promiscuous mode
[   78.339492][ T1053] Bluetooth: hci6: command 0x0419 tx timeout
[   78.360386][ T3544] device veth1_vlan entered promiscuous mode
[   78.392701][ T3633] Bluetooth: hci7: command 0x0419 tx timeout
[   78.400486][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   78.410340][ T1053] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   78.427313][ T3546] device veth1_macvtap entered promiscuous mode
[   78.452002][ T3550] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   78.477601][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   78.488094][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   78.504079][ T3552] 8021q: adding VLAN 0 to HW filter on device team0
[   78.541898][ T3537] 8021q: adding VLAN 0 to HW filter on device batadv0
[   78.556525][ T3535] batman_adv: batadv0: Interface activated: batadv_slave_0
[   78.582416][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   78.601746][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   78.610276][ T3257] bridge0: port 1(bridge_slave_0) entered blocking state
[   78.617675][ T3257] bridge0: port 1(bridge_slave_0) entered forwarding state
[   78.626488][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   78.635139][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   78.643282][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   78.652802][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   78.665518][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   78.680526][ T3536] 8021q: adding VLAN 0 to HW filter on device team0
[   78.699008][ T3546] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   78.713126][ T3546] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   78.725397][ T3546] batman_adv: batadv0: Interface activated: batadv_slave_0
[   78.778353][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   78.790125][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   78.799977][ T3607] bridge0: port 2(bridge_slave_1) entered blocking state
[   78.808070][ T3607] bridge0: port 2(bridge_slave_1) entered forwarding state
[   78.816616][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   78.826341][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   78.835776][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   78.843852][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   78.852093][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   78.861163][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   78.870452][ T3607] bridge0: port 1(bridge_slave_0) entered blocking state
[   78.878159][ T3607] bridge0: port 1(bridge_slave_0) entered forwarding state
[   78.886734][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   78.896032][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   78.904606][ T3607] bridge0: port 2(bridge_slave_1) entered blocking state
[   78.911945][ T3607] bridge0: port 2(bridge_slave_1) entered forwarding state
[   78.921771][ T3535] batman_adv: batadv0: Interface activated: batadv_slave_1
[   78.937024][ T3546] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   78.948792][ T3546] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   78.961363][ T3546] batman_adv: batadv0: Interface activated: batadv_slave_1
[   78.989093][ T3549] 8021q: adding VLAN 0 to HW filter on device batadv0
[   79.000040][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   79.010787][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   79.030596][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   79.051278][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   79.060088][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   79.075200][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   79.086448][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   79.098881][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   79.115915][ T3544] device veth0_macvtap entered promiscuous mode
[   79.132101][ T3535] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   79.141755][ T3535] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   79.150651][ T3535] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   79.160197][ T3535] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   79.177717][ T3546] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   79.187340][ T3546] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   79.196713][ T3546] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   79.205709][ T3546] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   79.253324][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   79.262098][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   79.272425][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   79.282437][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   79.291987][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   79.308844][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   79.322262][ T3544] device veth1_macvtap entered promiscuous mode
[   79.336050][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   79.391971][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   79.399677][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   79.408359][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   79.418952][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   79.428092][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   79.446791][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   79.455850][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   79.479663][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   79.519172][ T3550] 8021q: adding VLAN 0 to HW filter on device batadv0
[   79.544780][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   79.553509][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   79.563264][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   79.573720][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   79.582943][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   79.662741][ T3544] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   79.683665][ T3544] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   79.694149][ T3544] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   79.705933][ T3544] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   79.726057][ T3544] batman_adv: batadv0: Interface activated: batadv_slave_0
[   79.739523][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   79.748856][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   79.758300][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   79.767436][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   79.776683][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   79.785489][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   79.794262][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   79.803191][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   79.847078][ T3544] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   79.858525][ T3544] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   79.868835][ T3544] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   79.881452][ T3544] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   79.893577][ T3544] batman_adv: batadv0: Interface activated: batadv_slave_1
[   79.905982][ T3536] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   79.916109][ T3552] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   79.936061][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   79.949127][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   79.959139][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   79.968736][ T3607] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   79.993411][ T3537] device veth0_vlan entered promiscuous mode
[   80.047758][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   80.056656][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   80.073096][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   80.092013][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   80.127896][ T3544] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   80.137702][ T3544] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   80.147391][ T3544] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   80.170827][ T3544] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   80.232686][  T159] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   80.240732][  T159] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   80.265412][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   80.280740][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   80.303717][ T3537] device veth1_vlan entered promiscuous mode
[   80.347924][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   80.361670][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   80.370758][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   80.381197][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   80.390341][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   80.411767][ T3549] device veth0_vlan entered promiscuous mode
[   80.437978][  T149] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   80.443652][ T3549] device veth1_vlan entered promiscuous mode
[   80.448745][  T149] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   80.474510][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   80.484760][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   80.493318][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   80.502247][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   80.522604][  T149] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   80.535922][  T149] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   80.551600][ T3536] 8021q: adding VLAN 0 to HW filter on device batadv0
[   80.583636][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   80.601915][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   80.621809][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   80.630795][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   80.639612][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   80.654429][ T3550] device veth0_vlan entered promiscuous mode
[   80.723405][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   80.742378][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   80.750148][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   80.787536][ T3552] 8021q: adding VLAN 0 to HW filter on device batadv0
[   80.833119][ T3550] device veth1_vlan entered promiscuous mode
[   80.835350][ T1152] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   80.852333][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   80.882924][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   80.887037][ T1152] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   80.913830][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   80.942011][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   80.952004][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   80.963565][ T3632] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   80.999422][ T3537] device veth0_macvtap entered promiscuous mode
[   81.046737][ T3549] device veth0_macvtap entered promiscuous mode
[   81.061356][   T39] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   81.082463][ T3671] 
[   81.083678][   T39] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   81.085121][ T3671] ============================================
[   81.085128][ T3671] WARNING: possible recursive locking detected
[   81.085136][ T3671] 5.15.0-rc6-syzkaller #0 Not tainted
[   81.085148][ T3671] --------------------------------------------
[   81.110570][   T39] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   81.112201][ T3671] syz-executor.5/3671 is trying to acquire lock:
[   81.112213][ T3671] ffff8880600c0ed0 (&type->i_mutex_dir_key#6){++++}-{3:3}, at: fuse_reverse_inval_entry+0x208/0x540
[   81.143660][ T3671] 
[   81.143660][ T3671] but task is already holding lock:
[   81.151469][ T3671] ffff8880600c0150 (&type->i_mutex_dir_key#6){++++}-{3:3}, at: fuse_reverse_inval_entry+0x4c/0x540
[   81.162301][ T3671] 
[   81.162301][ T3671] other info that might help us debug this:
[   81.170804][ T3671]  Possible unsafe locking scenario:
[   81.170804][ T3671] 
[   81.178349][ T3671]        CPU0
[   81.181632][ T3671]        ----
[   81.184915][ T3671]   lock(&type->i_mutex_dir_key#6);
[   81.190229][ T3671]   lock(&type->i_mutex_dir_key#6);
[   81.195558][ T3671] 
[   81.195558][ T3671]  *** DEADLOCK ***
[   81.195558][ T3671] 
[   81.203724][ T3671]  May be due to missing lock nesting notation
[   81.203724][ T3671] 
[   81.209480][ T3552] device veth0_vlan entered promiscuous mode
[   81.212047][ T3671] 2 locks held by syz-executor.5/3671:
[   81.212062][ T3671]  #0: ffff888075030338 (&fc->killsb){.+.+}-{3:3}, at: fuse_dev_do_write+0x2647/0x2bb0
[   81.226759][ T3552] device veth1_vlan entered promiscuous mode
[   81.233322][ T3671]  #1: ffff8880600c0150 (&type->i_mutex_dir_key#6){++++}-{3:3}, at: fuse_reverse_inval_entry+0x4c/0x540
[   81.250456][ T3671] 
[   81.250456][ T3671] stack backtrace:
[   81.256611][ T3671] CPU: 0 PID: 3671 Comm: syz-executor.5 Not tainted 5.15.0-rc6-syzkaller #0
[   81.262890][ T3552] device veth0_macvtap entered promiscuous mode
[   81.266474][ T3671] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[   81.266490][ T3671] Call Trace:
[   81.266498][ T3671]  dump_stack_lvl+0xfc/0x174
[   81.278191][ T3552] device veth1_macvtap entered promiscuous mode
[   81.283114][ T3671]  __lock_acquire.cold+0x16a/0x462
[   81.283155][ T3671]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[   81.299500][ T3552] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   81.303061][ T3671]  lock_acquire+0x1a8/0x4f0
[   81.303094][ T3671]  ? fuse_reverse_inval_entry+0x208/0x540
[   81.309281][ T3552] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   81.319893][ T3671]  ? lock_downgrade+0x710/0x710
[   81.319917][ T3671]  ? do_raw_spin_unlock+0x16f/0x230
[   81.325014][ T3552] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   81.330453][ T3671]  ? __sanitizer_cov_trace_const_cmp4+0x1c/0x70
[   81.340477][ T3552] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   81.345564][ T3671]  down_write+0x93/0x150
[   81.345605][ T3671]  ? fuse_reverse_inval_entry+0x208/0x540
[   81.352822][ T3552] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   81.364052][ T3671]  ? __down_timeout+0x10/0x10
[   81.364095][ T3671]  ? __sanitizer_cov_trace_const_cmp8+0x1d/0x70
[   81.370430][ T3552] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   81.380262][ T3671]  ? fuse_dir_changed+0xe3/0x160
[   81.380301][ T3671]  ? __sanitizer_cov_trace_const_cmp1+0x22/0x80
[   81.386178][ T3552] batman_adv: batadv0: Interface activated: batadv_slave_0
[   81.390543][ T3671]  fuse_reverse_inval_entry+0x208/0x540
[   81.405482][ T3552] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   81.406799][ T3671]  fuse_dev_do_write+0xda8/0x2bb0
[   81.413378][ T3552] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   81.423620][ T3671]  ? __lock_acquire+0xc8f/0x5910
[   81.423661][ T3671]  ? fuse_dev_splice_read+0x6b0/0x6b0
[   81.423694][ T3671]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[   81.429296][ T3552] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   81.435697][ T3671]  ? lock_chain_count+0x20/0x20
[   81.435738][ T3671]  ? find_held_lock+0x2d/0x110
[   81.435758][ T3671]  ? aa_file_perm+0x568/0x10b0
[   81.435780][ T3671]  ? reacquire_held_locks+0x4b0/0x4b0
[   81.443877][ T3552] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   81.449301][ T3671]  fuse_dev_write+0x144/0x1d0
[   81.449341][ T3671]  ? fuse_dev_splice_write+0xa30/0xa30
[   81.461039][ T3552] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   81.466043][ T3671]  ? aa_file_perm+0x592/0x10b0
[   81.466077][ T3671]  ? aa_path_link+0x300/0x300
[   81.476330][ T3552] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   81.481152][ T3671]  ? __sanitizer_cov_trace_const_cmp4+0x1c/0x70
[   81.481192][ T3671]  ? iov_iter_init+0x3e/0x170
[   81.489083][ T3552] batman_adv: batadv0: Interface activated: batadv_slave_1
[   81.494190][ T3671]  new_sync_write+0x473/0x640
[   81.494226][ T3671]  ? new_sync_read+0x6d0/0x6d0
[   81.494248][ T3671]  ? print_circular_bug+0x1b0/0x1e0
[   81.510235][ T3552] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   81.513928][ T3671]  ? __sanitizer_cov_trace_const_cmp4+0x1c/0x70
[   81.513966][ T3671]  ? security_file_permission+0x90/0x100
[   81.519045][ T3552] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   81.523705][ T3671]  vfs_write+0x7d9/0xb00
[   81.523734][ T3671]  ksys_write+0x131/0x250
[   81.529452][ T3552] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   81.539515][ T3671]  ? __ia32_sys_read+0xa0/0xa0
[   81.539558][ T3671]  ? lockdep_hardirqs_on_prepare+0x17b/0x400
[   81.539583][ T3671]  ? syscall_enter_from_user_mode+0x20/0x70
[   81.544570][ T3552] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   81.549991][ T3671]  do_syscall_64+0x34/0xb0
[   81.550037][ T3671]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   81.700041][ T3671] RIP: 0033:0x7ff58d1b8f69
[   81.705109][ T3671] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
[   81.724733][ T3671] RSP: 002b:00007ff58c5390c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   81.733346][ T3671] RAX: ffffffffffffffda RBX: 00007ff58d2e6f80 RCX: 00007ff58d1b8f69
[   81.741413][ T3671] RDX: 000000000000002e RSI: 00000000200000c0 RDI: 0000000000000003
[   81.750009][ T3671] RBP: 00007ff58d2054a4 R08: 0000000000000000 R09: 0000000000000000
[   81.758472][ T3671] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   81.767485][ T3671] R13: 000000000000000b R14: 00007ff58d2e6f80 R15: 00007fff9a579a18
2024/04/16 16:39:34 executed programs: 8
[   81.807246][ T3544] ieee80211 phy7: Selected rate control algorithm 'minstrel_ht'
[   81.847259][ T3537] device veth1_macvtap entered promiscuous mode
[   81.881238][ T3550] device veth0_macvtap entered promiscuous mode
[   81.900545][ T3549] device veth1_macvtap entered promiscuous mode
[   81.910653][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   81.911578][ T1266] cfg80211: failed to load regulatory.db
[   81.924681][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   81.961504][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   81.992938][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   82.021639][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   82.034887][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   82.047196][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   82.057513][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   82.069532][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   82.081330][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   82.090327][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   82.100198][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   82.109249][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   82.120405][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   82.129973][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   82.140545][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   82.150067][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   82.179319][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.192624][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.203975][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.215922][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.226977][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.237966][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.248226][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.259114][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.274700][ T3537] batman_adv: batadv0: Interface activated: batadv_slave_0
[   82.286454][ T3550] device veth1_macvtap entered promiscuous mode
[   82.301112][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   82.309258][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   82.322369][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   82.336205][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   82.347994][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   82.360192][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   82.374872][ T3552] ieee80211 phy8: Selected rate control algorithm 'minstrel_ht'
[   82.452276][  T149] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   82.474677][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   82.476966][  T149] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   82.486040][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   82.506174][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   82.521790][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.534856][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   82.545771][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.560223][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   82.570981][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.584246][ T3537] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   82.595435][ T3537] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.609013][ T3537] batman_adv: batadv0: Interface activated: batadv_slave_1
[   82.631476][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.649376][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.663880][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.676202][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.689712][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.702369][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.713113][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.724531][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.734690][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.745770][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.760821][ T3549] batman_adv: batadv0: Interface activated: batadv_slave_0
[   82.789804][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   82.799524][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   82.808833][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   82.818231][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   82.827669][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   82.846826][ T3537] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   82.858894][ T3537] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   82.868253][ T3537] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   82.880186][ T3537] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   82.913673][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.926970][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.946066][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.963695][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   82.978109][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   82.990430][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.001546][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   83.012603][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.023256][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   83.034946][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.045098][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   83.056386][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.068275][ T3550] batman_adv: batadv0: Interface activated: batadv_slave_0
[   83.076753][ T3544] ieee80211 phy9: Selected rate control algorithm 'minstrel_ht'
[   83.103400][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.108983][  T149] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   83.129358][  T149] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   83.130922][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.147427][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.158361][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.169130][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.179964][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.190505][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.203812][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.213990][ T3549] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.226239][ T3549] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.238257][ T3549] batman_adv: batadv0: Interface activated: batadv_slave_1
[   83.253094][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   83.262130][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   83.272200][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   83.280360][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   83.301053][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   83.310026][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   83.319025][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   83.337752][ T3552] ieee80211 phy10: Selected rate control algorithm 'minstrel_ht'
[   83.355042][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.366074][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.376415][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.387545][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.397912][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.408769][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.420016][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.431559][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.442796][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.455377][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.467146][ T3550] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   83.478973][ T3550] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   83.490578][ T3550] batman_adv: batadv0: Interface activated: batadv_slave_1
[   83.498659][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   83.507818][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   83.516553][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   83.526096][   T20] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   83.545504][  T149] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   83.554814][  T149] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   83.564675][ T3536] device veth0_vlan entered promiscuous mode
[   83.574457][ T3549] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   83.583804][ T3549] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   83.593806][ T3549] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   83.604569][ T3549] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   83.624351][   T39] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   83.635566][ T3550] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   83.645028][ T3550] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   83.655048][ T3550] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   83.664025][ T3550] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   83.689447][  T149] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   83.702540][  T149] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   83.725283][ T3536] device veth1_vlan entered promiscuous mode
[   83.747684][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   83.771925][ T3537] ieee80211 phy11: Selected rate control algorithm 'minstrel_ht'
[   83.876505][ T3549] ieee80211 phy12: Selected rate control algorithm 'minstrel_ht'
[   83.907760][  T149] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   83.928482][  T149] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   83.935031][ T3536] device veth0_macvtap entered promiscuous mode
[   83.965764][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   83.979655][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   83.992818][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   84.005745][ T3550] ieee80211 phy13: Selected rate control algorithm 'minstrel_ht'
[   84.017764][ T3536] device veth1_macvtap entered promiscuous mode
[   84.036876][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   84.036989][ T1152] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.058647][ T1152] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.060188][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   84.085085][ T3610] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   84.107275][ T3537] ieee80211 phy14: Selected rate control algorithm 'minstrel_ht'
[   84.144488][  T149] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.147194][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.161171][  T149] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.166348][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.181714][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.194467][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.206005][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.220775][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.232018][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.245849][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.257405][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.268986][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.279772][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.293935][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.304500][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   84.318254][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.330563][ T3536] batman_adv: batadv0: Interface activated: batadv_slave_0
[   84.347564][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   84.359926][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   84.370274][ T3257] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   84.380726][ T3549] ieee80211 phy15: Selected rate control algorithm 'minstrel_ht'
[   84.392154][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.403934][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.413905][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.425136][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.435423][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.447835][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.458183][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.472953][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.483745][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.495579][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.506732][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.518300][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.529279][ T3536] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   84.541253][ T3536] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   84.555044][ T3536] batman_adv: batadv0: Interface activated: batadv_slave_1
[   84.572660][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   84.581019][  T149] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.585366][ T3670] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   84.588981][  T149] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.608890][ T1266] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   84.623447][ T3536] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   84.634502][ T3536] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   84.643893][ T3536] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   84.653020][ T3536] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   84.667975][ T3550] ieee80211 phy16: Selected rate control algorithm 'minstrel_ht'
[   84.672062][  T149] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.683813][  T149] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.709146][ T3649] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   84.771458][ T1152] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.779798][ T1152] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.798143][ T3536] ieee80211 phy17: Selected rate control algorithm 'minstrel_ht'
[   84.811223][ T3649] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   84.858368][ T1213] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.859245][ T3536] ieee80211 phy18: Selected rate control algorithm 'minstrel_ht'
[   84.881317][ T1213] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.906415][ T3633] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   84.945651][ T1152] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   84.980156][ T1152] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   84.999258][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
2024/04/16 16:39:39 executed programs: 66
